Industrial Exterior Oil instructions

The wood must be clean, dry and free from dust.

1. Sanding
Final sanding grit 100

2. Roller
Use sponge roller shore 5 or type 2 or type 3.  Apply the product 30-35 gr/m2 or use spray gun.

3. Spray
30-40 gr/m2

4. Even out
Use minimum two nylon brushes. 1st runs clockwise and 2nd runs counter-clockwise.  Or remove excess oil by cloth.

5. Hot air oven
Temperature 50-60 °C with good ventilation.  Or dry on racks.

6. Stacking
4-6 h by 20 °C

7. Intermediate sanding
Use sand paper grit 320-400. Optional.

8. Roller
Use sponge roller shore 5 or type 2 or type 3.
Apply 15-20 gr/m2 or use spray gun

9. Spray
20-30 gr/m2

10. Even out
Use minimum two nylon brushes. 1st runs clockwise and 2nd runs counter-clockwise.  Or remove excess oil by cloth.

11. Hot air oven
Temperature 50-60 °C with good ventilation.  Or dry on racks.

12. Stacking
12 h by 20 °C before packing.

Viscosity correction: Correction is made with a maximum of 5-10 % water. Always use WOCA Outdoor Primer before applying Exterior Oil on oak, western red cedar and all other softwood species.