Invisible Oil Care instructions

It is important that the product, the room and the floor are at a temperature between 59°F and 86°F and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

If maintaining an existing Invisible Oiled surface, clean the surface using WOCA Intensive Wood Cleaner and leave until completely dry, then start with Step 1.

If applying as the 3rd coat of the Invisible Oil System, do not clean with Intensive Wood Cleaner before Invisible Oil Care.  Start with Step 1.

1. Thoroughly shake the container, both before and during use.  Apply Invisible Oil Care in a thin and even coat, using a thin nap paint roller. Work in small areas of no more than 200sf at a time.
2. Carefully polish the area with a white pad. Use a polishing machine for larger surfaces. Continue polishing until the wood is completely saturated and the surface has a uniform appearance.
3. Remove excess oil care with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet.

The surface can be used with caution after 6-12 hours and is fully hardened after 5 days at room temperature.

Do not expose the floor to water or other liquids for the first 5 days, while Invisible Oil Care is hardening. For optimal cleaning, we recommend WOCA Natural Soap White, which cares for and maintains the surface.

Footer image

© 2024 WOCA USA, Powered by Shopify

Login

Forgot your password?

Don't have an account yet?
Create account