Master Color Oil instructions
Product, room and floor temperature must be between 59-86°F. Wood humidity must not exceed 12%. Ensure good ventilation during application and when drying. The wood must be newly sanded, use grit 100-120 for the final sanding. Vacuum thoroughly. Clean the wood with WOCA Intensive Wood Cleaner and leave it to dry for at least 8 hours before applying the oil.
Always remember to test on a less visible spot to check the compatibility of the surface with the product.
Always remember to test on a less visible spot to check the compatibility of the surface with the product.
Thoroughly shake the container of Master Color Oil , both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch.
- Apply the oil using a short-bristled paint roller in an even coat. Work in sections of no more than 110 sf at a time.
- Leave the oil to be absorbed for 10-15 minutes. If the oil soaks quickly into the wood, apply more oil.
- Polish the oil into the wood until the surface appears saturated. Use a buffing machine with a 3M red pad.
- Immediately remove excess oil with WOCA Polishing Cloths under a clean buffing pad until the surface no longer appears wet. Continue until the whole area has been polished and excess oil has been thoroughly removed.
- 12-24 hours later at 68°F, apply a 2nd coat of oil without a paint roller. Pour approximately 4 ounces (1/2 cup) of oil directly on the floor and immediately start polishing the oil with the floor buffer and a 3M white pad. The oil should be polished thoroughly, and then immediately remove excess oil with a WOCA Polishing Cloth under a clean buffing pad until the surface no longer appears wet, repeating Step 4.