Optima instructions

It is important that both wood and floor finish have a temperature of min. 59°F (preferably around 68°F) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and tack the floor afterwards, using a tightly-wrung water-soaked mop/cloth. The floor must be completely dry before sealing or finishing. When sealing, use WOCA Sealers for newly sanded wood to reduce side bonding.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. 1 coat of Sealer and 1 coat of Optima floor finish should be applied undiluted, using a brush or roller. Leave the surface to dry until the next day.
  2. Sand the surface with 120-180 and vacuum clean the surface thoroughly.
  3. Apply the final coat of undiluted Optima.
Water and other liquids, such as red wine and coffee, must be wiped off immediately to prevent staining.
Footer image

© 2024 WOCA USA, Powered by Shopify

Login

Forgot your password?

Don't have an account yet?
Create account