Patina disc instructions

For 1 coat Diamond Oil Active applications on plain sawn hardwood species (not reclaimed)

1. Place 2-4 Patina Discs opposite to each other on a red/white polishing pad
2. Apply the oil using a paint roller or a polishing machine, then polish with the pad and attached patina discs.  The combination of light sanding and polishing helps the oil penetrate faster into the wood and results in a very smooth finish. The wood must not dry during the process of application. Always make sure that a sufficient amount of oil is applied, in order to work in well.
3. When the surface appears saturated remove excess oil using a polishing cloth attached to a clean buffing pad.
4. Finally, polish with a clean white pad, in order to obtain a uniform sheen.

For final oil coat applications

1. Place 2-4 Patina Discs opposite to each other on a red/white polishing pad
2. Apply the oil using a paint roller or a polishing machine, then polish with the pad and attached patina discs. The combination of light sanding and polishing helps the oil penetrate faster into the wood and results in a very smooth finish. The wood must not dry during the process of application. Always make sure that a sufficient amount of oil is applied, in order to work in well.
3. When the surface appears saturated remove excess oil using a polishing cloth attached to a clean buffing pad.
4. Finally, polish with a clean white pad, in order to obtain a uniform sheen.