Commercial Cleaning Oil

Commercial Cleaning Oil

Product form

SKU: 527309US

5 liter

  • Clean and re-oil with 1 product and a waterless process.
  • Low odor.
  • Dry time 3 hours.
  • Renews high traffic commercial areas that cannot close for renovations.
  • Full cure 24 hours.

Clean and protect high traffic areas with WOCA Cleaning Oil in one easy step. Extremly low odor and easy to apply, it's the perfect solution to keep your oiled wood floors looking like new in busy environments like airports, retail stores and restaurants. Enjoy a cleaned and restored water-repellent surface in as little as 3 hours. Trust the ultimate care and protection for your wood.

Product details


VOC: 15 g/l. (max)

Density: 0.80-0.85 g/ml.

Shelf life: 3 years

Application Temperature: +59-77°F and approx. 50% air humidity.

Coverage: 1,080 sq.ft./L

Color: Natural

Cleaning of tools: Use WOCA Solvent or turpentine

Storage: +50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging: 5 liter, 169.070 FL.OZ.

Viscosity: 10-15 Sec. DIN Cup 4

Odor: Characteristic

Solid content: 10-20%

Mixing ratio: Ready to use. Do not dilute.

Light use: 2-3 hours at 68°F

Recommendation: Do not expose the floor to water or clean it for the first 24 hours, while the oil is hardening. After 24 hours the floor can be cleaned with WOCA Commercial Soap, which gives the surface extra protection.

Fully hard: 24 hours at 68°F

It is important that the product, the room and the floor are at a temperature between 59°F and 86°F and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. If the surface is very dirty and stained, we recommend cleaning with WOCA Intensive Wood Cleaner, diluted 1:20 using a buffing machine and green polishing pad before the first application of Cleaning Oil

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Shake the container well before use.
  2. Apply approx. 3.38 fl. oz of Cleaning Oil US per 110 sq.ft./L. Apply the oil using a polishing machine and a green polishing pad. The oil should be polished well into the wood. Continue polishing until the wood seems saturated and the surface has an even, uniform appearance. The surface must not appear wet afterwards.
  3. The floor can be used after a drying time of . Do not clean the floor or expose it to water during the first 2-3 hours, while the oil is curing.
For regular cleaning, use WOCA Commercial Soap for example every 2 or 3 days. Follow dosage instructions on the label. The soap is suitable for use in floor washing machines. Commercial Oil should be applied 2-4 times a year, or as required.
Technical Data Sheet
Safety Data Sheet

How to use Commercial Oil

Watch the step by step video to learn how to clean and re-oil a commercial space or end grain flooring with WOCA Commercial Oil.

  • Waterless system
  • Dry time 3 hours
  • Fully cured 24 hours
Footer image

© 2024 WOCA USA, Powered by Shopify


Forgot your password?

Don't have an account yet?
Create account