It is important that the product, the room and the floor are at a temperature between 59°F and 86°F and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. The wood should be primed with Invisible Oil Primer and then sanded with a maroon pad. Thoroughly vacuum clean the surface afterwards.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

1. Thoroughly shake the container of Invisible Oil, both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch.
Apply Invisible Oil using a short-bristled paint roller in an even coat. Work in small areas of no more than 215 sq.ft./L at a time.  Leave the oil to be absorbed for 5 minutes. If the oil soaks quickly into the wood, apply more oil.
2.  Polish the oil into the wood until the floor appears saturated. Use a buffing machine with a maroon pad. Regularly change the buffing pad to prevent the oil from lumping.
3.  Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.

The surface can be used with caution after 24 hours and is fully hardened after 1 week at room temperature.

After 24 hours, the surface must be treated with Invisible Oil Care to improve the floor’s resistance to stains and wear.

For optimal cleaning, we recommend WOCA Natural Soap White, which cares for and maintains the surface.

Do not expose the floor to water or other liquids for the first 7 days, while the oil is hardening.