Worktop Oil

Worktop Oil

Product form

SKU: 527713AA

Oiling of wooden worktops and furniture

  • Safe for food contact
  • Contains natural oils
  • Provides a dirt and water-resistant surface
  • Long lasting natural appearance
  • Can be used on all wood varieties
  • Highlights the glow and grain structure of the wood

Transform your wood counter, butcher block, worktop, and cutting boards into a stunning piece of art. Our Worktop Oil provides a protective barrier that repels water and prevents staining, while achieving a natural luster on your wood surface. Safe for food contact and suitable for untreated or oil-treated wood, take your worktop to the next level.

    Product details


    VOC: 120 g/l. (max)

    Density: 0.90-0.95 g/ml.

    Shelf life: 3 years

    Application Temperature: +59-86°F and approx. 50% air humidity.

    Coverage: 130-160 sq.ft./L

    Color: Natural

    Cleaning of tools: Use WOCA Solvent or turpentine

    Storage: +50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

    Packaging: .75L, 25.361 FL.OZ.

    Viscosity: 30-35 Sec. DIN Cup 4

    Odor: Characteristic

    Solid content: 70-75%

    Between coats: 30-60 minutes at 68°F

    Light use: 24 hours at 68°F

    Recommendation: Until fully hardened the surface must be treated with care. All liquids must be removed immediately.

    Fully hard: 7 days at 68°F

    It is important that both wood and oil have a temperature of min. 59°F (preferably around 68°F) and air humidity of approx. 50 %. Make sure that the room is well-ventilated for optimal evaporation and drying time.

    Always remember to test on a less visible spot to check the compatibility of the surface with the product.

    1. Sand old and previously treated surfaces with GRIT 180 sandpaper. Vacuum clean the surface thoroughly.
    2. Thoroughly clean the surface with Intensive Wood Cleaner Spray. Then wipe surface with plain water. After cleaning, leave the surface to dry for at least 8-9 hours
    3. Stir the Oil carefully before and during use. Container with different batch numbers should be mixed before use to avoid differences in shade and gloss.
    4. Use a paintbrush to distribute an appropriate amount of oil in an even, covering coat. If possible, the reverse side of the work surface should also be given a coat of oil.
    5. Wait approx. 30 minutes at 68°F, while the oil soaks into the wood. Apply more oil if dry areas appear.
    6. Polish with a White 3M pad in the direction of the wood grain. This will make the surface more durable. Then wipe off all excess oil with a WOCA Polishing Cloth. No excess oil should remain on the surface.
    7. Allow the surface to rest for an hour and repeat steps 3 to 7.
    8. The surface should be treated two or three times before use. For the final treatment sand in wet oil with 320-400, before wiping off with a WOCA Polishing Cloth
    The oiled surface can be used after 24 hours at 68 degrees. During this period, the surface must not come into contact with water. The oil does not harden completely until after about a week. Therefore, treat with care during this period. Any spilled liquids should be wiped up immediately.

    Wood humidity must not exceed 18%. High temperature and low air humidity will reduce drying times. Low temperature and high air humidity will extend drying times.
    The wood surface should be maintained at least once a year, or when necessary. 
    Technical Data Sheet
    Safety Data Sheet

    Danish Indoor Climate Label is a voluntary labeling system for products and materials which can document the effect of off gassing. Indoor climate labeled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

    The migration of metals (As, Hg, Se, Cr, Sb, Cd, Pb, Ba) of the sample was tested according EN 71 Part 3 1995. There was no evidence for migration of the named metals above the limit of detection (10-50 ppm). All interior WOCA products are suitable for toys.

    WOCA Maintenance Gel and Worktop oil are tested for specific migration, MOSH/MOAH, NIAS and sensory properties for 2 hours at 104°F under worst-case simulations.

    Collapsible row

    Row content

    How to use Worktop Oil

    Step by step video for oiling wood countertops, butcherblock or cutting boards.

    Footer image

    © 2024 WOCA USA, Powered by Shopify


    Forgot your password?

    Don't have an account yet?
    Create account