The wood must be freshly-sanded with grit 100-120 for the final sanding. Product, room and floor temperature must be between 59-86°F. Ensure good ventilation when applying the oil and when it is drying. Wash the surface with WOCA Intensive Wood Cleaner. Leave the floor to dry for at least 8 hours before applying the oil.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

1. Wash the floor with Intensive Wood Cleaner. Leave the floor to dry for at least 24 hours at 68°F before applying the oil.
2. Thoroughly shake the container of Diamond Oil Active , both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch. Apply the oil using a short-bristled paint roller in an even coat.
3. Leave the oil to be absorbed for 10-15 minutes. If the oil soaks quickly into the wood, apply more oil.
4. Polish the oil into the wood until the surface appears saturated. Use a buffing machine with a buffing machine for large areas and a polishing cloth/pad manually for small areas.
5. Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
6. If an extra-attractive finish and resistance is desired, the floor can be repolished with 3.38 fl. oz Diamond Oil Active per 110 sq.ft./L within 8-9 hours hours of the first application. The oil should be polished thoroughly, as described in 4+5.
7. The floor can be used with caution after 24 hours.
8. Clean tools with WOCA Solvent or Turpentine.

If an extra-attractive finish and resistance is desired, the floor can be repolished with 3.38 fl. oz Diamond Oil Active per 110 sq.ft./L within 8-10 hours of the first application. The oil should be polished thoroughly, as previously described.